PRODUCT

You are here:
  1. Home
  2. PRODUCTS
  3. Search results for “K03”

Showing all 3 results

K03 series Open-Loop current sensor

Accuracy: 1%
Measuring Range: 100A|200A|300A|400A|500A|600A|700A|800A
Output: ±4V@IPN
Supply Voltage: ±15V
 

The K03 series is an Open-Loop current sensor based on the Hall effect. It provides electronic measurement of DC, AC or pulse currents at same time, and their combinations with galvanic between the primary (high current) and secondary circuits.

Read more

P02 piezoresistive pressure transmitter

E-Connector: DIN75301-803A, Direct cable, M12X1, Metri-Pack 150, RK03FB
Range: 0…100 bar
Output: 0.5-4.5V ratio 5VDC, 1-5V 12 to 30VDC, 0-10V 14 to 30VDC, 4-20mA 12 to 30VDC
Type: Absolute, Relative
The P02 series pressure transmitter for almost all industries applications that provide reliable pressure even in extreme environments measurement results. The pressure transmitter combines the latest Application Specific Integrated Circuit (ASIC) and Oil-Filled piezoresistive technology, provides flexible output signals, absolute or relative (gauge) versions with measurement ranges from 0–1 to 0–100 bar. A wide variety of pressure and electrical connections are available.

Read more

PA series OEM pressure transmitter

E-Connector: Bayonet, DIN75301-803A, DIN75301-803C, Direct cable, M12X1, Metri-Pack 150, Pre-tinned pads, RK03FB, Wires 50.8mm
Range: 0…60 bar
Output: 0.5-4.5V ratio 5VDC, 0.5-2.5V ratio 5VDC, 0.5-3.5V ratio 5VDC, 1-5V 12 to 30VDC, 0-10V 14 to 30VDC, 4-20mA 12 to 30VDC
Type: Absolute, Relative
The PA series pressure transducer combines the latest Application Specific Integrated Circuit (ASIC) technology with proven piezoresistive sensors. The measuring bridge is printed directly on one side of the diaphragm by means of Thick-Film technology. The rear part of the diaphragm can be exposed directly to the medium to be measured. The 304 housing surrounds a pressure transducer designed for general use wherever a rugged, reliable pressure transducer is required.

Read more